Supersport LED rear indicators

Just a short post. I never liked the huge rear indicators on the Supersport, and do not like the fact that they are the only two incandescent light bulbs on the whole bike. So I searched for something different.

To change the indicators to LED, no resistors are needed in the cabling, they just need to be electrically connected and the flash rate will be correct. The small tray needs to be removed from under the tail piece, 5 screws, and the original indicators will fall out. If you want to preserve the original Ducati plugs the an adaptor to bullet connectors is needed, and two indicator blanks are needed to fit the new indicators.

 

These indicators are sequential, that means that the light flows from inside to outside rather than just flashing on and off. I made a little video with the hazard flashers on to demonstrate. As can be seen from the above picture, the indicators are rubber mounted so are not easily knocked off.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.